https://bugzilla.redhat.com/show_bug.cgi?id=1758524
Examples are displays 320*200 and 800*480
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Marek Kedzierski <mkedzier@redhat.com>
Upon change of display mode the driver waits until all the
queued drawables pushed to the host or discarded. This eliminates
server warnings "rendering incorrect" in "get_drawable" when the
drawable command was created by guest driver just before change
of display mode and posted to the server during or after the change.
This patch and comments are heavily based on a patch sent by
Yuri Benditovich (with serialization code completely changed and
added generation to discard pending commands on old surface).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Yuri Benditovich <yuri.benditovich@daynix.com>
As GetModeInfo is also inline there is no reason the derived class
could redefine the array anyway.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Don't use the old style _inline specifier.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Yuri Benditovich <yuri.benditovich@daynix.com>
This make easier to change allocation of memory using different
memory Bars.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Yuri Benditovich <yuri.benditovich@daynix.com>
As VA addresses are used as pointers there's no need to handle
them as 64-bit integer (which make the code more complicated)
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Yuri Benditovich <yuri.benditovich@daynix.com>
There were always 2 slots used so make no sense to allocate
always dynamically.
Also in this way m_MainMemSlot and m_SurfaceMemSlot become
constant making the code slightly smaller.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Yuri Benditovich <yuri.benditovich@daynix.com>
This make easier to change allocation of memory using different
memory Bars.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Yuri Benditovich <yuri.benditovich@daynix.com>
In case of VSync is active (for the driver this means it shall take
in account watchdog policy and ensure fast execution of PresentDisplayOnly
callback) allocate bitmaps for drawable objects using non-forced requests.
If immediate allocation is not possible, place entire bitmap into memory
chunk allocated from the OS.
If bitmap is allocated from device memory, but one of later
chunks can't be allocated, allocate this and further chunks from
OS memory. All these 'delayed' allocations placed into linked list
which root entry is part of QXLOutput structure.
>From separate thread, before sending drawable objects down, review
the list of delayed chunks and allocate device memory (forced) to
all of them.
The cost of solution is 2 pointers added to each drawable or cursor
object.
Cursor commands currently do not use them; in future we have an option
to offload also cursor commands.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Preparation for non-forced allocations.
Update bitmap creation procedure to allocate device memory forced
or non-forced.
In forced case it works as before.
In non-forced case, if allocation fails, the procedure allocates
memory from OS pool for entire bitmap and copies source data to it.
Later, before sending command, memory will be allocated from device
memory and copied from intermediate location to new one.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Move bitmap creation to dedicated procedure. Currently it
uses only forced allocations, as before. Later it will
be used from different flows, forced and non-forced.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Preparation for offload of allocations from device's memory
to separate thread. Procedure PutBytesAlign is called to
allocate memory chunk from device memory and copy data to it.
With current commit the procedure (if called with non-NULL
linked list root entry parameter) can use non-forced allocation.
If such allocation fails, it allocates 'delayed' chunk from
OS memory and copies data to it. Later before sending drawable command
this chunk shall be processed, storage allocated from device memory
(forced) and data copied to it.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Preparation for further scenarios when memory allocation failure
can happen and we'll need to use fallback when possible.
Memory allocation can fail in following cases:
- when non-forced memory allocation used and the attempt to allocate
the memory must be as fast as possible, without waits
- when forced memory allocation used, but the driver already received
stop command and waits for thread termination. Note that in case
the VSync control is enabled stop command may happen even after the video
subsystem executes switch to VGA mode. In such case QEMU will not return
previously allocated objects (assuming the QXL driver already disabled
and ignoring callbacks from Spice server in VGA mode).
In case of forced memory allocation the allocation routine waits
unpredictable time until the request is satisfied. In current commit
we do not acquire m_MemLock mutex for all this time, but release it
when entering long wait to allow another caller to try allocating memory.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
In release build this does not affect the code.
In debug build we will have a warning printout when waiting
on event is close to 2 seconds - this can be a cause of following
stop by OS. The printout contains name of related event variable.
There is one event (in offload thread) that long wait on it
does not affect any functionality, for it this warning is disabled.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
In release build this class resolved to empty statements.
In debug build it is useful for measurement of execution time.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Instead of sending drawable commands down from presentation
callback, collect drawables objects and pass them to dedicated
thread for processing. This reduce peak load of presentation
callback.
Signed-off-by: Javier Celaya <javier.celaya@flexvdi.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Create rendering thread upon device start and terminate it upon
stop. The dedicated thread is normally pending for display commands
to be sent to the host. Currently only single NULL (termination)
command is placed to the ring where the thread consumes events from.
Signed-off-by: Javier Celaya <javier.celaya@flexvdi.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
In case the driver supports VSync control feature, it
maintains timer for VSync interrupt indication.
In further commits this timer will be started upon
class driver request. The interrupt notification and
related DPC do not access device registers.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Do not clear interrupt mask upon interrupt.
Instead clear pending interrupt status and write
QXL_IO_UPDATE_IRQ register (this drops interrupt level).
There are 3 advantages:
1. We do not need to wake the host to enable interrupt
mask in DPC procedure (1 wake per interrupt instead of 2)
2. The driver is not sensitive to failure when queues DPC, as
already queued DPC will process this interrupt when executed.
3. When we implement VSync interrupt simulation, we do not
need to touch registers neither when notify the OS nor when
process DPC related to this notification.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Concentrate filling of signal info in single procedure.
Fill signal info with specific or default frequency data
according to the global flag of VSync support.
Note that the state of this flobal flag must be defined only
on driver startup (based on OS version or any other information
available at DriverEntry) and can't be changed later.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This is a follow up of 31ca5d035d
("Implements screen to screen move correctly").
As now we don't copy memory to implement moves there's no
reason to take into account these area for memory mappings
as memory is not accessed anymore.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Yuri Benditovich <yuri.benditovich@daynix.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1411340
Do not set SupportNonVGA field for device rev.4 and higher.
Then the class driver will not call miniport's procedure
StopDeviceAndReleasePostDisplayOwnership upon PnP stop.
QXL device modes are not compatible with VGA ones; the
driver in this procedure returns display information related
to QXL mode which later used by BasicDisplay driver and causes
it to show the screen incorrectly or fail to show it at all.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Doing some fast check on Windows 8.1 you could note that
moving windows you got a weird effect were windows were a
bit misaligned.
As documented in DXGKARG_PRESENT_DISPLAYONLY page
NumMoves/pMoves fields point to an array of screen-to-screen
moves while our code implemented them as an image drawing
(the same implementation of dirty rects) causing the weird
effect mentioned.
This patch implement the moves using QXL_COPY_BITS operation
instead of a QXL_DRAW_COPY fixing the issue and avoiding sending
image to the server making the move/scroll operations on the
guest faster (and taking less bandwidth).
It seems that Windows 10 doesn't send the move commands but
instead send only dirty rects so you can't note this problem
using Windows 10.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Windows disables hw pointer acceleration and draws the cursor
in frame buffer if the driver does not report pointer capabilities
in QueryAdapterInfo. In this mode OS usually does not send pointer
commands to the driver or does it with pointer set to invisible
state. This mode of operation consumes CPU time and device-to-host
traffic. Now we enable pointer hardware acceleration.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
A more permissive licence is more in line with what Microsoft requires
for its WHQL certification
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This make sure that these function goes into the non
paged section.
Also this change is much shorter than marking code if
can be paged as almost code can be paged.
It's also coherent with other source files.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Sameeh Jubran <sameeh@daynix.com>
When qxl revision is 3, the vga driver is the one that is running.
While installing the driver the function VgaDevice::HWInit
has displayInfo structure zeroed out. The displayInfo should be
initialized using DxgkCbAcquirePostDisplayOwnership and thus it
should be called before calling HWInit.
Please note that we can't just move the call to "DxgkCbAcquirePostDisplayOwnership"
before calling HWInit as the m_Id isn't initialized for QxlDevice until the call to HWinit is over.
This patch fixes a bug similar to the one found here:
https://bugzilla.redhat.com/show_bug.cgi?id=1202267
However this one occurs when installing the driver.
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Part of source image mapped by PresentDisplayOnly
should be big enough to cover all rectangles being
transferred.
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Framebuffer should only be used in VGA mode, as WDDM DOD
driver doesn't use the frame buffer (bar0), so no
reason to map in into memory. However the mode is only known
at runtime therefore framebuffer logic should be active when the
driver is operating in vga mode only.
There were rare BSOD failures when the mapping failed.
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
This patch adds support for arbitrary resolution and updating
monitor configurations using custom ioctls.
This patch doesn't make any restriction for minimal resolution at all
as Windows can handle low resolution just fine, moreover the old (XPDM)
driver behaves like this too.
Based on a patch by Sandy Stutsman <sstutsma@redhat.com>
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
As documented in MSDN, "DxgkDdiPresentDisplayOnly" should copy
each "move rectangle" from a given source point in the source buffer
to the destination. The current implementation doesn't take into account
the shift of the given source point at all. This patch fixies the issue.
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Some files had different line ending (some lines DOS while some others
UNIX). Use the same line ending using the nearest ending.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
