From 49e29929331301ca72f8d075b4ae03f3a790c7ef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Benjamin=20H=C3=B6glinger-Stelzer?= Date: Mon, 26 Sep 2022 21:44:50 +0200 Subject: [PATCH] Migrated most native APIs to CsWin32 --- .../ModemStatus.cs | 55 +- .../NativeMethods.txt | 3 +- .../Nefarius.Peripherals.SerialPort.csproj | 1 + Nefarius.Peripherals.SerialPort/SerialPort.cs | 1535 +++++++++-------- Nefarius.Peripherals.SerialPort/Util.cs | 23 + .../Win32PInvoke/COMMPROP.cs | 28 - .../Win32PInvoke/COMMTIMEOUTS.cs | 15 - .../Win32PInvoke/COMSTAT.cs | 29 +- .../Win32PInvoke/DCB.cs | 41 - .../Win32PInvoke/OVERLAPPED.cs | 15 - .../Win32PInvoke/Win32Com.cs | 155 -- 11 files changed, 871 insertions(+), 1029 deletions(-) create mode 100644 Nefarius.Peripherals.SerialPort/Util.cs delete mode 100644 Nefarius.Peripherals.SerialPort/Win32PInvoke/COMMPROP.cs delete mode 100644 Nefarius.Peripherals.SerialPort/Win32PInvoke/COMMTIMEOUTS.cs delete mode 100644 Nefarius.Peripherals.SerialPort/Win32PInvoke/DCB.cs delete mode 100644 Nefarius.Peripherals.SerialPort/Win32PInvoke/OVERLAPPED.cs delete mode 100644 Nefarius.Peripherals.SerialPort/Win32PInvoke/Win32Com.cs diff --git a/Nefarius.Peripherals.SerialPort/ModemStatus.cs b/Nefarius.Peripherals.SerialPort/ModemStatus.cs index dc993c9..a7ad443 100644 --- a/Nefarius.Peripherals.SerialPort/ModemStatus.cs +++ b/Nefarius.Peripherals.SerialPort/ModemStatus.cs @@ -1,29 +1,36 @@ -using Nefarius.Peripherals.SerialPort.Win32PInvoke; +using Windows.Win32.Devices.Communication; -namespace Nefarius.Peripherals.SerialPort +namespace Nefarius.Peripherals.SerialPort; + +/// +/// Represents the status of the modem control input signals. +/// +public readonly struct ModemStatus { - /// - /// Represents the status of the modem control input signals. - /// - public struct ModemStatus + private readonly uint _status; + + internal ModemStatus(uint val) { - private readonly uint _status; - internal ModemStatus(uint val) { _status = val; } - /// - /// Condition of the Clear To Send signal. - /// - public bool Cts { get { return ((_status & Win32Com.MS_CTS_ON) != 0); } } - /// - /// Condition of the Data Set Ready signal. - /// - public bool Dsr { get { return ((_status & Win32Com.MS_DSR_ON) != 0); } } - /// - /// Condition of the Receive Line Status Detection signal. - /// - public bool Rlsd { get { return ((_status & Win32Com.MS_RLSD_ON) != 0); } } - /// - /// Condition of the Ring Detection signal. - /// - public bool Ring { get { return ((_status & Win32Com.MS_RING_ON) != 0); } } + _status = val; } + + /// + /// Condition of the Clear To Send signal. + /// + public bool Cts => (_status & (uint)MODEM_STATUS_FLAGS.MS_CTS_ON) != 0; + + /// + /// Condition of the Data Set Ready signal. + /// + public bool Dsr => (_status & (uint)MODEM_STATUS_FLAGS.MS_DSR_ON) != 0; + + /// + /// Condition of the Receive Line Status Detection signal. + /// + public bool Rlsd => (_status & (uint)MODEM_STATUS_FLAGS.MS_RLSD_ON) != 0; + + /// + /// Condition of the Ring Detection signal. + /// + public bool Ring => (_status & (uint)MODEM_STATUS_FLAGS.MS_RING_ON) != 0; } \ No newline at end of file diff --git a/Nefarius.Peripherals.SerialPort/NativeMethods.txt b/Nefarius.Peripherals.SerialPort/NativeMethods.txt index c2b548f..15077ca 100644 --- a/Nefarius.Peripherals.SerialPort/NativeMethods.txt +++ b/Nefarius.Peripherals.SerialPort/NativeMethods.txt @@ -13,4 +13,5 @@ EscapeCommFunction GetCommModemStatus GetOverlappedResult ClearCommError -GetCommProperties \ No newline at end of file +GetCommProperties +WIN32_ERROR \ No newline at end of file diff --git a/Nefarius.Peripherals.SerialPort/Nefarius.Peripherals.SerialPort.csproj b/Nefarius.Peripherals.SerialPort/Nefarius.Peripherals.SerialPort.csproj index ce80c6b..a071ba9 100644 --- a/Nefarius.Peripherals.SerialPort/Nefarius.Peripherals.SerialPort.csproj +++ b/Nefarius.Peripherals.SerialPort/Nefarius.Peripherals.SerialPort.csproj @@ -30,6 +30,7 @@ + all diff --git a/Nefarius.Peripherals.SerialPort/SerialPort.cs b/Nefarius.Peripherals.SerialPort/SerialPort.cs index 673e2a5..2ca73fc 100644 --- a/Nefarius.Peripherals.SerialPort/SerialPort.cs +++ b/Nefarius.Peripherals.SerialPort/SerialPort.cs @@ -2,804 +2,869 @@ using System.Runtime.InteropServices; using System.Text; using System.Threading; -using Nefarius.Peripherals.SerialPort.Win32PInvoke; +using Windows.Win32; +using Windows.Win32.Devices.Communication; +using Windows.Win32.Foundation; +using Windows.Win32.Storage.FileSystem; +using JetBrains.Annotations; -namespace Nefarius.Peripherals.SerialPort +namespace Nefarius.Peripherals.SerialPort; + +/// +/// PInvokeSerialPort main class. +/// Borrowed from http://msdn.microsoft.com/en-us/magazine/cc301786.aspx ;) +/// +public class SerialPort : IDisposable { + /// /// - /// PInvokeSerialPort main class. - /// Borrowed from http://msdn.microsoft.com/en-us/magazine/cc301786.aspx ;) + /// For IDisposable /// - public class SerialPort : IDisposable + public void Dispose() { - #region Private fields + Close(); + } - private readonly ManualResetEvent _writeEvent = new ManualResetEvent(false); - private bool _auto; - private bool _checkSends = true; + /// + /// Opens the com port and configures it with the required settings + /// + /// false if the port could not be opened + [UsedImplicitly] + public bool Open() + { + var portDcb = new DCB(); + var commTimeouts = new COMMTIMEOUTS(); - private Handshake _handShake; - private IntPtr _hPort; - private bool _online; - private IntPtr _ptrUwo = IntPtr.Zero; - private Exception _rxException; - private bool _rxExceptionReported; - private Thread _rxThread; - private int _stateBrk = 2; - private int _stateDtr = 2; - private int _stateRts = 2; - private int _writeCount; + if (_online) return false; - #endregion + _hPort = PInvoke.CreateFile( + PortName, + FILE_ACCESS_FLAGS.FILE_GENERIC_READ | FILE_ACCESS_FLAGS.FILE_GENERIC_WRITE, + 0, + null, + FILE_CREATION_DISPOSITION.OPEN_EXISTING, FILE_FLAGS_AND_ATTRIBUTES.FILE_FLAG_OVERLAPPED, + null + ); - #region Public properties - - /// - /// Class constructor - /// - public SerialPort(string portName) + if (_hPort.IsInvalid) { - PortName = portName; + if (Marshal.GetLastWin32Error() == (int)WIN32_ERROR.ERROR_ACCESS_DENIED) return false; + throw new CommPortException("Port Open Failure"); } - /// - /// - /// Class constructor - /// - public SerialPort(string portName, int baudRate) : this(portName) + _online = true; + + commTimeouts.WriteTotalTimeoutConstant = (uint)SendTimeoutConstant; + commTimeouts.WriteTotalTimeoutMultiplier = (uint)SendTimeoutMultiplier; + + portDcb.Init( + Parity is Parity.Odd or Parity.Even, + TxFlowCts, + TxFlowDsr, + (int)UseDtr, + RxGateDsr, + !TxWhenRxXoff, + TxFlowX, + RxFlowX, + (int)UseRts + ); + portDcb.BaudRate = (uint)BaudRate; + portDcb.ByteSize = (byte)DataBits; + portDcb.Parity = (DCB_PARITY)Parity; + portDcb.StopBits = (DCB_STOP_BITS)StopBits; + portDcb.XoffChar = new CHAR((byte)XoffChar); + portDcb.XonChar = new CHAR((byte)XonChar); + portDcb.XoffLim = (ushort)RxHighWater; + portDcb.XonLim = (ushort)RxLowWater; + + if (RxQueue != 0 || TxQueue != 0) + if (!PInvoke.SetupComm(_hPort, (uint)RxQueue, (uint)TxQueue)) + ThrowException("Bad queue settings"); + + if (!PInvoke.SetCommState(_hPort, portDcb)) ThrowException("Bad com settings"); + if (!PInvoke.SetCommTimeouts(_hPort, commTimeouts)) ThrowException("Bad timeout settings"); + + _stateBrk = 0; + switch (UseDtr) { - BaudRate = baudRate; + case HsOutput.None: + _stateDtr = 0; + break; + case HsOutput.Online: + _stateDtr = 1; + break; } - /// - /// If true, the port will automatically re-open on next send if it was previously closed due - /// to an error (default: false) - /// - public bool AutoReopen { get; set; } - - /// - /// Baud Rate (default: 115200) - /// - /// Unsupported rates will throw "Bad settings". - public int BaudRate { get; set; } = 115200; - - /// - /// If true, subsequent Send commands wait for completion of earlier ones enabling the results - /// to be checked. If false, errors, including timeouts, may not be detected, but performance - /// may be better. - /// - public bool CheckAllSends { get; set; } = true; - - /// - /// Number of databits 1..8 (default: 8) unsupported values will throw "Bad settings" - /// - public int DataBits { get; set; } = 8; - - /// - /// The parity checking scheme (default: none) - /// - public Parity Parity { get; set; } = Parity.None; - - /// - /// If true, Xon and Xoff characters are sent to control the data flow from the remote station (default: false) - /// - public bool RxFlowX { get; set; } - - /// - /// If true, received characters are ignored unless DSR is asserted by the remote station (default: false) - /// - public bool RxGateDsr { get; set; } - - /// - /// The number of free bytes in the reception queue at which flow is disabled (default: 2048) - /// - public int RxHighWater { get; set; } = 2048; - - /// - /// The number of bytes in the reception queue at which flow is re-enabled (default: 512) - /// - public int RxLowWater { get; set; } = 512; - - /// - /// Requested size for receive queue (default: 0 = use operating system default) - /// - public int RxQueue { get; set; } - - /// - /// Constant. Max time for Send in ms = (Multiplier * Characters) + Constant (default: 0) - /// - public int SendTimeoutConstant { get; set; } - - /// - /// Multiplier. Max time for Send in ms = (Multiplier * Characters) + Constant - /// (default: 0 = No timeout) - /// - public int SendTimeoutMultiplier { get; set; } - - /// - /// Number of stop bits (default: one) - /// - public StopBits StopBits { get; set; } = StopBits.One; - - /// - /// If true, transmission is halted unless CTS is asserted by the remote station (default: false) - /// - public bool TxFlowCts { get; set; } - - /// - /// If true, transmission is halted unless DSR is asserted by the remote station (default: false) - /// - public bool TxFlowDsr { get; set; } - - /// - /// If true, transmission is halted when Xoff is received and restarted when Xon is received (default: false) - /// - public bool TxFlowX { get; set; } - - /// - /// Requested size for transmit queue (default: 0 = use operating system default) - /// - public int TxQueue { get; set; } - - /// - /// If false, transmission is suspended when this station has sent Xoff to the remote station (default: true) - /// Set false if the remote station treats any character as an Xon. - /// - public bool TxWhenRxXoff { get; set; } = true; - - /// - /// Specidies the use to which the DTR output is put (default: none) - /// - public HsOutput UseDtr { get; set; } = HsOutput.None; - - /// - /// Specifies the use to which the RTS output is put (default: none) - /// - public HsOutput UseRts { get; set; } = HsOutput.None; - - /// - /// The character used to signal Xoff for X flow control (default: DC3) - /// - public ASCII XoffChar { get; set; } = ASCII.DC3; - - /// - /// The character used to signal Xon for X flow control (default: DC1) - /// - public ASCII XonChar { get; set; } = ASCII.DC1; - - /// - /// True if online. - /// - public bool Online => _online && CheckOnline(); - - /// - /// True if the RTS pin is controllable via the RTS property - /// - protected bool RtSavailable => _stateRts < 2; - - /// - /// Set the state of the RTS modem control output - /// - protected bool Rts + switch (UseRts) { - set - { - if (_stateRts > 1) return; - CheckOnline(); - if (value) - { - if (Win32Com.EscapeCommFunction(_hPort, Win32Com.SETRTS)) - _stateRts = 1; - else - ThrowException("Unexpected Failure"); - } - else - { - if (Win32Com.EscapeCommFunction(_hPort, Win32Com.CLRRTS)) - _stateRts = 1; - else - ThrowException("Unexpected Failure"); - } - } - get => _stateRts == 1; + case HsOutput.None: + _stateRts = 0; + break; + case HsOutput.Online: + _stateRts = 1; + break; } - /// - /// True if the DTR pin is controllable via the DTR property - /// - protected bool DtrAvailable => _stateDtr < 2; + _checkSends = CheckAllSends; - /// - /// The state of the DTR modem control output - /// - protected bool Dtr + _writeOverlapped = new NativeOverlapped { - set - { - if (_stateDtr > 1) return; - CheckOnline(); - if (value) - { - if (Win32Com.EscapeCommFunction(_hPort, Win32Com.SETDTR)) - _stateDtr = 1; - else - ThrowException("Unexpected Failure"); - } - else - { - if (Win32Com.EscapeCommFunction(_hPort, Win32Com.CLRDTR)) - _stateDtr = 0; - else - ThrowException("Unexpected Failure"); - } - } - get => _stateDtr == 1; - } + EventHandle = _checkSends ? _writeEvent.SafeWaitHandle.DangerousGetHandle() : IntPtr.Zero + }; - /// - /// Assert or remove a break condition from the transmission line - /// - protected bool Break + _writeCount = 0; + + _rxException = null; + _rxExceptionReported = false; + + _rxThread = new Thread(ReceiveThread) { - set - { - if (_stateBrk > 1) return; - CheckOnline(); - if (value) - { - if (Win32Com.EscapeCommFunction(_hPort, Win32Com.SETBREAK)) - _stateBrk = 0; - else - ThrowException("Unexpected Failure"); - } - else - { - if (Win32Com.EscapeCommFunction(_hPort, Win32Com.CLRBREAK)) - _stateBrk = 0; - else - ThrowException("Unexpected Failure"); - } - } - get => _stateBrk == 1; - } + Name = "CommBaseRx", + Priority = ThreadPriority.AboveNormal, + IsBackground = true + }; + _rxThread.Start(); + Thread.Sleep(1); //Give rx thread time to start. By documentation, 0 should work, but it does not! - /// - /// Port Name - /// - public string PortName { get; set; } - - public Handshake Handshake - { - get => _handShake; - set - { - _handShake = value; - switch (_handShake) - { - case Handshake.None: - TxFlowCts = false; - TxFlowDsr = false; - TxFlowX = false; - RxFlowX = false; - UseRts = HsOutput.Online; - UseDtr = HsOutput.Online; - TxWhenRxXoff = true; - RxGateDsr = false; - break; - case Handshake.XonXoff: - TxFlowCts = false; - TxFlowDsr = false; - TxFlowX = true; - RxFlowX = true; - UseRts = HsOutput.Online; - UseDtr = HsOutput.Online; - TxWhenRxXoff = true; - RxGateDsr = false; - XonChar = ASCII.DC1; - XoffChar = ASCII.DC3; - break; - case Handshake.CtsRts: - TxFlowCts = true; - TxFlowDsr = false; - TxFlowX = false; - RxFlowX = false; - UseRts = HsOutput.Handshake; - UseDtr = HsOutput.Online; - TxWhenRxXoff = true; - RxGateDsr = false; - break; - case Handshake.DsrDtr: - TxFlowCts = false; - TxFlowDsr = true; - TxFlowX = false; - RxFlowX = false; - UseRts = HsOutput.Online; - UseDtr = HsOutput.Handshake; - TxWhenRxXoff = true; - RxGateDsr = false; - break; - } - } - } - - #endregion - - /// - /// - /// For IDisposable - /// - public void Dispose() - { - Close(); - } - - /// - /// Opens the com port and configures it with the required settings - /// - /// false if the port could not be opened - public bool Open() - { - var portDcb = new DCB(); - var commTimeouts = new COMMTIMEOUTS(); - var wo = new OVERLAPPED(); - - if (_online) return false; - - _hPort = Win32Com.CreateFile(PortName, Win32Com.GENERIC_READ | Win32Com.GENERIC_WRITE, 0, IntPtr.Zero, - Win32Com.OPEN_EXISTING, Win32Com.FILE_FLAG_OVERLAPPED, IntPtr.Zero); - if (_hPort == (IntPtr) Win32Com.INVALID_HANDLE_VALUE) - { - if (Marshal.GetLastWin32Error() == Win32Com.ERROR_ACCESS_DENIED) return false; - throw new CommPortException("Port Open Failure"); - } - - _online = true; - - commTimeouts.ReadIntervalTimeout = 0; - commTimeouts.ReadTotalTimeoutConstant = 0; - commTimeouts.ReadTotalTimeoutMultiplier = 0; - commTimeouts.WriteTotalTimeoutConstant = SendTimeoutConstant; - commTimeouts.WriteTotalTimeoutMultiplier = SendTimeoutMultiplier; - portDcb.Init(Parity == Parity.Odd || Parity == Parity.Even, TxFlowCts, TxFlowDsr, - (int) UseDtr, RxGateDsr, !TxWhenRxXoff, TxFlowX, RxFlowX, (int) UseRts); - portDcb.BaudRate = BaudRate; - portDcb.ByteSize = (byte) DataBits; - portDcb.Parity = (byte) Parity; - portDcb.StopBits = (byte) StopBits; - portDcb.XoffChar = (byte) XoffChar; - portDcb.XonChar = (byte) XonChar; - portDcb.XoffLim = (short) RxHighWater; - portDcb.XonLim = (short) RxLowWater; - if (RxQueue != 0 || TxQueue != 0) - if (!Win32Com.SetupComm(_hPort, (uint) RxQueue, (uint) TxQueue)) - ThrowException("Bad queue settings"); - if (!Win32Com.SetCommState(_hPort, ref portDcb)) ThrowException("Bad com settings"); - if (!Win32Com.SetCommTimeouts(_hPort, ref commTimeouts)) ThrowException("Bad timeout settings"); - - _stateBrk = 0; - switch (UseDtr) - { - case HsOutput.None: - _stateDtr = 0; - break; - case HsOutput.Online: - _stateDtr = 1; - break; - } - - switch (UseRts) - { - case HsOutput.None: - _stateRts = 0; - break; - case HsOutput.Online: - _stateRts = 1; - break; - } - - _checkSends = CheckAllSends; - wo.Offset = 0; - wo.OffsetHigh = 0; - wo.hEvent = _checkSends ? _writeEvent.SafeWaitHandle.DangerousGetHandle() : IntPtr.Zero; - _ptrUwo = Marshal.AllocHGlobal(Marshal.SizeOf(wo)); - Marshal.StructureToPtr(wo, _ptrUwo, true); - _writeCount = 0; - - _rxException = null; - _rxExceptionReported = false; - - // TODO: utilize Task Parallel Library here - _rxThread = new Thread(ReceiveThread) - { - Name = "CommBaseRx", Priority = ThreadPriority.AboveNormal, IsBackground = true - }; - - _rxThread.Start(); - Thread.Sleep(1); //Give rx thread time to start. By documentation, 0 should work, but it does not! - - _auto = false; - if (AfterOpen()) - { - _auto = AutoReopen; - return true; - } - - Close(); - return false; - } - - /// - /// Closes the com port. - /// - public void Close() - { - if (_online) - { - _auto = false; - BeforeClose(false); - InternalClose(); - _rxException = null; - } - } - - private void InternalClose() - { - Win32Com.CancelIo(_hPort); - if (_rxThread != null) - { - _rxThread.Abort(); - _rxThread = null; - } - - Win32Com.CloseHandle(_hPort); - if (_ptrUwo != IntPtr.Zero) Marshal.FreeHGlobal(_ptrUwo); - _stateRts = 2; - _stateDtr = 2; - _stateBrk = 2; - _online = false; - } - - /// - /// Destructor (just in case) - /// - ~SerialPort() - { - Close(); - } - - /// - /// Block until all bytes in the queue have been transmitted. - /// - public void Flush() - { - CheckOnline(); - CheckResult(); - } - - /// - /// Use this to throw exceptions in derived classes. Correctly handles threading issues - /// and closes the port if necessary. - /// - /// Description of fault - protected void ThrowException(string reason) - { - if (Thread.CurrentThread == _rxThread) throw new CommPortException(reason); - if (_online) - { - BeforeClose(true); - InternalClose(); - } - - if (_rxException == null) throw new CommPortException(reason); - throw new CommPortException(_rxException); - } - - /// - /// Queues bytes for transmission. - /// - /// Array of bytes to be sent - public void Write(byte[] toSend) - { - uint sent; - CheckOnline(); - CheckResult(); - _writeCount = toSend.GetLength(0); - if (Win32Com.WriteFile(_hPort, toSend, (uint) _writeCount, out sent, _ptrUwo)) - { - _writeCount -= (int) sent; - } - else - { - if (Marshal.GetLastWin32Error() != Win32Com.ERROR_IO_PENDING) ThrowException("Unexpected failure"); - } - } - - /// - /// Queues string for transmission. - /// - /// Array of bytes to be sent - public void Write(string toSend) - { - Write(new ASCIIEncoding().GetBytes(toSend)); - } - - /// - /// Queues a single byte for transmission. - /// - /// Byte to be sent - public void Write(byte toSend) - { - var b = new byte[1]; - b[0] = toSend; - Write(b); - } - - /// - /// Queues a single char for transmission. - /// - /// Byte to be sent - public void Write(char toSend) - { - Write(toSend.ToString()); - } - - /// - /// Queues string with a new line ("\r\n") for transmission. - /// - /// Array of bytes to be sent - public void WriteLine(string toSend) - { - Write(new ASCIIEncoding().GetBytes(toSend + Environment.NewLine)); - } - - private void CheckResult() - { - if (_writeCount <= 0) return; - uint sent; - if (Win32Com.GetOverlappedResult(_hPort, _ptrUwo, out sent, _checkSends)) - { - _writeCount -= (int) sent; - if (_writeCount != 0) ThrowException("Send Timeout"); - } - else - { - if (Marshal.GetLastWin32Error() != Win32Com.ERROR_IO_PENDING) ThrowException("Unexpected failure"); - } - } - - /// - /// Sends a protocol byte immediately ahead of any queued bytes. - /// - /// Byte to send - /// False if an immediate byte is already scheduled and not yet sent - public void SendImmediate(byte tosend) - { - CheckOnline(); - if (!Win32Com.TransmitCommChar(_hPort, tosend)) ThrowException("Transmission failure"); - } - - /// - /// Gets the status of the modem control input signals. - /// - /// Modem status object - protected ModemStatus GetModemStatus() - { - uint f; - - CheckOnline(); - if (!Win32Com.GetCommModemStatus(_hPort, out f)) ThrowException("Unexpected failure"); - return new ModemStatus(f); - } - - - /// - /// Get the status of the queues - /// - /// Queue status object - protected QueueStatus GetQueueStatus() - { - COMSTAT cs; - COMMPROP cp; - uint er; - - CheckOnline(); - if (!Win32Com.ClearCommError(_hPort, out er, out cs)) ThrowException("Unexpected failure"); - if (!Win32Com.GetCommProperties(_hPort, out cp)) ThrowException("Unexpected failure"); - return new QueueStatus(cs.Flags, cs.cbInQue, cs.cbOutQue, cp.dwCurrentRxQueue, cp.dwCurrentTxQueue); - } - - /// - /// Override this to provide processing after the port is opened (i.e. to configure remote - /// device or just check presence). - /// - /// false to close the port again - protected virtual bool AfterOpen() + _auto = false; + if (AfterOpen()) { + _auto = AutoReopen; return true; } - /// - /// Override this to provide processing prior to port closure. - /// - /// True if closing due to an error - protected virtual void BeforeClose(bool error) + Close(); + + return false; + } + + /// + /// Closes the com port. + /// + [UsedImplicitly] + public void Close() + { + if (_online) { + _auto = false; + BeforeClose(false); + InternalClose(); + _rxException = null; + } + } + + private void InternalClose() + { + PInvoke.CancelIo(_hPort); + if (_rxThread != null) + { + _rxThread.Abort(); + _rxThread = null; } - public event Action DataReceived; + _hPort.Close(); - /// - /// Override this to process received bytes. - /// - /// The byte that was received - protected void OnRxChar(byte ch) + _stateRts = 2; + _stateDtr = 2; + _stateBrk = 2; + _online = false; + } + + /// + /// Destructor (just in case) + /// + ~SerialPort() + { + Close(); + } + + /// + /// Block until all bytes in the queue have been transmitted. + /// + [UsedImplicitly] + public void Flush() + { + CheckOnline(); + CheckResult(); + } + + /// + /// Use this to throw exceptions in derived classes. Correctly handles threading issues + /// and closes the port if necessary. + /// + /// Description of fault + protected void ThrowException(string reason) + { + if (Thread.CurrentThread == _rxThread) throw new CommPortException(reason); + if (_online) { - DataReceived?.Invoke(ch); + BeforeClose(true); + InternalClose(); } - /// - /// Override this to take action when transmission is complete (i.e. all bytes have actually - /// been sent, not just queued). - /// - protected virtual void OnTxDone() + if (_rxException == null) throw new CommPortException(reason); + throw new CommPortException(_rxException); + } + + /// + /// Queues bytes for transmission. + /// + /// Array of bytes to be sent + [UsedImplicitly] + public unsafe void Write(byte[] toSend) + { + CheckOnline(); + CheckResult(); + _writeCount = toSend.GetLength(0); + + fixed (byte* ptr = toSend) + fixed (NativeOverlapped* overlapped = &_writeOverlapped) { - } - - /// - /// Override this to take action when a break condition is detected on the input line. - /// - protected virtual void OnBreak() - { - } - - /// - /// Override this to take action when a ring condition is signaled by an attached modem. - /// - protected virtual void OnRing() - { - } - - /// - /// Override this to take action when one or more modem status inputs change state - /// - /// The status inputs that have changed state - /// The state of the status inputs - protected virtual void OnStatusChange(ModemStatus mask, ModemStatus state) - { - } - - /// - /// Override this to take action when the reception thread closes due to an exception being thrown. - /// - /// The exception which was thrown - protected virtual void OnRxException(Exception e) - { - } - - private void ReceiveThread() - { - var buf = new byte[1]; - - var sg = new AutoResetEvent(false); - var ov = new OVERLAPPED(); - var unmanagedOv = Marshal.AllocHGlobal(Marshal.SizeOf(ov)); - ov.Offset = 0; - ov.OffsetHigh = 0; - ov.hEvent = sg.SafeWaitHandle.DangerousGetHandle(); - Marshal.StructureToPtr(ov, unmanagedOv, true); - - uint eventMask = 0; - var uMask = Marshal.AllocHGlobal(Marshal.SizeOf(eventMask)); - - try + uint sent; + if (PInvoke.WriteFile(_hPort, ptr, (uint)_writeCount, &sent, overlapped)) { - while (true) + _writeCount -= (int)sent; + } + else + { + if (Marshal.GetLastWin32Error() != (int)WIN32_ERROR.ERROR_IO_PENDING) + ThrowException("Unexpected failure"); + } + } + } + + /// + /// Queues string for transmission. + /// + /// Array of bytes to be sent + [UsedImplicitly] + public void Write(string toSend) + { + Write(new ASCIIEncoding().GetBytes(toSend)); + } + + /// + /// Queues a single byte for transmission. + /// + /// Byte to be sent + [UsedImplicitly] + public void Write(byte toSend) + { + var b = new byte[1]; + b[0] = toSend; + Write(b); + } + + /// + /// Queues a single char for transmission. + /// + /// Byte to be sent + [UsedImplicitly] + public void Write(char toSend) + { + Write(toSend.ToString()); + } + + /// + /// Queues string with a new line ("\r\n") for transmission. + /// + /// Array of bytes to be sent + [UsedImplicitly] + public void WriteLine(string toSend) + { + Write(new ASCIIEncoding().GetBytes(toSend + Environment.NewLine)); + } + + private void CheckResult() + { + if (_writeCount <= 0) return; + + if (PInvoke.GetOverlappedResult(_hPort, _writeOverlapped, out var sent, _checkSends)) + { + _writeCount -= (int)sent; + if (_writeCount != 0) ThrowException("Send Timeout"); + } + else + { + if (Marshal.GetLastWin32Error() != (int)WIN32_ERROR.ERROR_IO_PENDING) ThrowException("Unexpected failure"); + } + } + + /// + /// Sends a protocol byte immediately ahead of any queued bytes. + /// + /// Byte to send + /// False if an immediate byte is already scheduled and not yet sent + public void SendImmediate(byte toSend) + { + CheckOnline(); + if (!PInvoke.TransmitCommChar(_hPort, new CHAR(toSend))) ThrowException("Transmission failure"); + } + + /// + /// Gets the status of the modem control input signals. + /// + /// Modem status object + /*protected ModemStatus GetModemStatus() + { + CheckOnline(); + if (!PInvoke.GetCommModemStatus(_hPort, out var f)) ThrowException("Unexpected failure"); + return new ModemStatus(f); + } + */ + + /// + /// Get the status of the queues + /// + /// Queue status object + /*protected QueueStatus GetQueueStatus() + { + COMSTAT cs; + COMMPROP cp; + uint er; + + CheckOnline(); + if (!PInvoke.ClearCommError(_hPort, out er, out cs)) ThrowException("Unexpected failure"); + if (!PInvoke.GetCommProperties(_hPort, out cp)) ThrowException("Unexpected failure"); + return new QueueStatus(cs.Flags, cs.cbInQue, cs.cbOutQue, cp.dwCurrentRxQueue, cp.dwCurrentTxQueue); + }*/ + + /// + /// Override this to provide processing after the port is opened (i.e. to configure remote + /// device or just check presence). + /// + /// false to close the port again + protected virtual bool AfterOpen() + { + return true; + } + + /// + /// Override this to provide processing prior to port closure. + /// + /// True if closing due to an error + protected virtual void BeforeClose(bool error) + { + } + + public event Action DataReceived; + + /// + /// Override this to process received bytes. + /// + /// The byte that was received + protected void OnRxChar(byte ch) + { + DataReceived?.Invoke(ch); + } + + /// + /// Override this to take action when transmission is complete (i.e. all bytes have actually + /// been sent, not just queued). + /// + protected virtual void OnTxDone() + { + } + + /// + /// Override this to take action when a break condition is detected on the input line. + /// + protected virtual void OnBreak() + { + } + + /// + /// Override this to take action when a ring condition is signaled by an attached modem. + /// + protected virtual void OnRing() + { + } + + /// + /// Override this to take action when one or more modem status inputs change state + /// + /// The status inputs that have changed state + /// The state of the status inputs + protected virtual void OnStatusChange(ModemStatus mask, ModemStatus state) + { + } + + /// + /// Override this to take action when the reception thread closes due to an exception being thrown. + /// + /// The exception which was thrown + protected virtual void OnRxException(Exception e) + { + } + + private unsafe void ReceiveThread() + { + var buf = new byte[1]; + + var sg = new AutoResetEvent(false); + var ov = new NativeOverlapped + { + EventHandle = sg.SafeWaitHandle.DangerousGetHandle() + }; + + COMM_EVENT_MASK eventMask = 0; + + try + { + while (true) + { + if (!PInvoke.SetCommMask( + _hPort, + COMM_EVENT_MASK.EV_RXCHAR | + COMM_EVENT_MASK.EV_TXEMPTY | + COMM_EVENT_MASK.EV_CTS | + COMM_EVENT_MASK.EV_DSR | + COMM_EVENT_MASK.EV_BREAK | + COMM_EVENT_MASK.EV_RLSD | + COMM_EVENT_MASK.EV_RING | + COMM_EVENT_MASK.EV_ERR) + ) + throw new CommPortException("IO Error [001]"); + + if (!PInvoke.WaitCommEvent(_hPort, ref eventMask, &ov)) { - if (!Win32Com.SetCommMask(_hPort, - Win32Com.EV_RXCHAR | Win32Com.EV_TXEMPTY | Win32Com.EV_CTS | Win32Com.EV_DSR - | Win32Com.EV_BREAK | Win32Com.EV_RLSD | Win32Com.EV_RING | Win32Com.EV_ERR)) - throw new CommPortException("IO Error [001]"); - Marshal.WriteInt32(uMask, 0); - if (!Win32Com.WaitCommEvent(_hPort, uMask, unmanagedOv)) + if (Marshal.GetLastWin32Error() == (int)WIN32_ERROR.ERROR_IO_PENDING) + sg.WaitOne(); + else + throw new CommPortException("IO Error [002]"); + } + + if ((eventMask & COMM_EVENT_MASK.EV_ERR) != 0) + { + CLEAR_COMM_ERROR_FLAGS errs; + + if (PInvoke.ClearCommError(_hPort, &errs, null)) { - if (Marshal.GetLastWin32Error() == Win32Com.ERROR_IO_PENDING) - sg.WaitOne(); - else - throw new CommPortException("IO Error [002]"); + var s = new StringBuilder("UART Error: ", 40); + if ((errs & CLEAR_COMM_ERROR_FLAGS.CE_FRAME) != 0) s = s.Append("Framing,"); + if ((errs & CLEAR_COMM_ERROR_FLAGS.CE_BREAK) != 0) s = s.Append("Break,"); + if ((errs & CLEAR_COMM_ERROR_FLAGS.CE_OVERRUN) != 0) s = s.Append("Overrun,"); + if ((errs & CLEAR_COMM_ERROR_FLAGS.CE_RXOVER) != 0) s = s.Append("Receive Overflow,"); + if ((errs & CLEAR_COMM_ERROR_FLAGS.CE_RXPARITY) != 0) s = s.Append("Parity,"); + + s.Length = s.Length - 1; + + throw new CommPortException(s.ToString()); } - eventMask = (uint) Marshal.ReadInt32(uMask); - if ((eventMask & Win32Com.EV_ERR) != 0) - { - uint errs; - if (Win32Com.ClearCommError(_hPort, out errs, IntPtr.Zero)) - { - var s = new StringBuilder("UART Error: ", 40); - if ((errs & Win32Com.CE_FRAME) != 0) s = s.Append("Framing,"); - if ((errs & Win32Com.CE_IOE) != 0) s = s.Append("IO,"); - if ((errs & Win32Com.CE_OVERRUN) != 0) s = s.Append("Overrun,"); - if ((errs & Win32Com.CE_RXOVER) != 0) s = s.Append("Receive Overflow,"); - if ((errs & Win32Com.CE_RXPARITY) != 0) s = s.Append("Parity,"); - if ((errs & Win32Com.CE_TXFULL) != 0) s = s.Append("Transmit Overflow,"); - s.Length = s.Length - 1; - throw new CommPortException(s.ToString()); - } + throw new CommPortException("IO Error [003]"); + } - throw new CommPortException("IO Error [003]"); - } - - if ((eventMask & Win32Com.EV_RXCHAR) != 0) + if ((eventMask & COMM_EVENT_MASK.EV_RXCHAR) != 0) + { + uint gotBytes; + do { - uint gotbytes; - do + fixed (byte* ptrBuffer = buf) { - if (!Win32Com.ReadFile(_hPort, buf, 1, out gotbytes, unmanagedOv)) + if (!PInvoke.ReadFile(_hPort, ptrBuffer, 1, &gotBytes, &ov)) { - if (Marshal.GetLastWin32Error() == Win32Com.ERROR_IO_PENDING) + if (Marshal.GetLastWin32Error() == (int)WIN32_ERROR.ERROR_IO_PENDING) { - Win32Com.CancelIo(_hPort); - gotbytes = 0; + PInvoke.CancelIo(_hPort); + gotBytes = 0; } else { throw new CommPortException("IO Error [004]"); } } + } - if (gotbytes == 1) OnRxChar(buf[0]); - } while (gotbytes > 0); - } - - if ((eventMask & Win32Com.EV_TXEMPTY) != 0) OnTxDone(); - if ((eventMask & Win32Com.EV_BREAK) != 0) OnBreak(); - - uint i = 0; - if ((eventMask & Win32Com.EV_CTS) != 0) i |= Win32Com.MS_CTS_ON; - if ((eventMask & Win32Com.EV_DSR) != 0) i |= Win32Com.MS_DSR_ON; - if ((eventMask & Win32Com.EV_RLSD) != 0) i |= Win32Com.MS_RLSD_ON; - if ((eventMask & Win32Com.EV_RING) != 0) i |= Win32Com.MS_RING_ON; - if (i != 0) - { - uint f; - if (!Win32Com.GetCommModemStatus(_hPort, out f)) throw new CommPortException("IO Error [005]"); - OnStatusChange(new ModemStatus(i), new ModemStatus(f)); - } - } - } - catch (Exception e) - { - if (uMask != IntPtr.Zero) Marshal.FreeHGlobal(uMask); - if (unmanagedOv != IntPtr.Zero) Marshal.FreeHGlobal(unmanagedOv); - if (!(e is ThreadAbortException)) - { - _rxException = e; - OnRxException(e); + if (gotBytes == 1) OnRxChar(buf[0]); + } while (gotBytes > 0); } + + if ((eventMask & COMM_EVENT_MASK.EV_TXEMPTY) != 0) OnTxDone(); + if ((eventMask & COMM_EVENT_MASK.EV_BREAK) != 0) OnBreak(); + + uint i = 0; + + if ((eventMask & COMM_EVENT_MASK.EV_CTS) != 0) i |= (uint)MODEM_STATUS_FLAGS.MS_CTS_ON; + if ((eventMask & COMM_EVENT_MASK.EV_DSR) != 0) i |= (uint)MODEM_STATUS_FLAGS.MS_DSR_ON; + if ((eventMask & COMM_EVENT_MASK.EV_RLSD) != 0) i |= (uint)MODEM_STATUS_FLAGS.MS_RLSD_ON; + if ((eventMask & COMM_EVENT_MASK.EV_RING) != 0) i |= (uint)MODEM_STATUS_FLAGS.MS_RING_ON; + + if (i != 0) + if (!PInvoke.GetCommModemStatus(_hPort, out var f)) + throw new CommPortException("IO Error [005]"); + // TODO: fix me! OnStatusChange(new ModemStatus(i), new ModemStatus(f)); } } - - private bool CheckOnline() + catch (Exception e) { - if (_rxException != null && !_rxExceptionReported) + if (e is not ThreadAbortException) { - _rxExceptionReported = true; - ThrowException("rx"); + _rxException = e; + OnRxException(e); } + } + } - if (_online) - { - uint f; - if (Win32Com.GetHandleInformation(_hPort, out f)) return true; - ThrowException("Offline"); - return false; - } + private bool CheckOnline() + { + if (_rxException != null && !_rxExceptionReported) + { + _rxExceptionReported = true; + ThrowException("rx"); + } - if (_auto) - if (Open()) - return true; + if (_online) + { + uint f; + if (PInvoke.GetHandleInformation(_hPort, out f)) return true; ThrowException("Offline"); return false; } + + if (_auto) + if (Open()) + return true; + ThrowException("Offline"); + return false; } + + #region Private fields + + private readonly ManualResetEvent _writeEvent = new(false); + private bool _auto; + private bool _checkSends = true; + + private Handshake _handShake; + private SafeHandle _hPort; + private bool _online; + private NativeOverlapped _writeOverlapped; + private Exception _rxException; + private bool _rxExceptionReported; + private Thread _rxThread; + private int _stateBrk = 2; + private int _stateDtr = 2; + private int _stateRts = 2; + private int _writeCount; + + #endregion + + #region Public properties + + /// + /// Class constructor + /// + public SerialPort(string portName) + { + PortName = portName; + } + + /// + /// + /// Class constructor + /// + public SerialPort(string portName, int baudRate) : this(portName) + { + BaudRate = baudRate; + } + + /// + /// If true, the port will automatically re-open on next send if it was previously closed due + /// to an error (default: false) + /// + [UsedImplicitly] + public bool AutoReopen { get; set; } + + /// + /// Baud Rate (default: 115200) + /// + /// Unsupported rates will throw "Bad settings". + [UsedImplicitly] + public int BaudRate { get; set; } = 115200; + + /// + /// If true, subsequent Send commands wait for completion of earlier ones enabling the results + /// to be checked. If false, errors, including timeouts, may not be detected, but performance + /// may be better. + /// + [UsedImplicitly] + public bool CheckAllSends { get; set; } = true; + + /// + /// Number of databits 1..8 (default: 8) unsupported values will throw "Bad settings" + /// + [UsedImplicitly] + public int DataBits { get; set; } = 8; + + /// + /// The parity checking scheme (default: none) + /// + [UsedImplicitly] + public Parity Parity { get; set; } = Parity.None; + + /// + /// If true, Xon and Xoff characters are sent to control the data flow from the remote station (default: false) + /// + [UsedImplicitly] + public bool RxFlowX { get; set; } + + /// + /// If true, received characters are ignored unless DSR is asserted by the remote station (default: false) + /// + [UsedImplicitly] + public bool RxGateDsr { get; set; } + + /// + /// The number of free bytes in the reception queue at which flow is disabled (default: 2048) + /// + [UsedImplicitly] + public int RxHighWater { get; set; } = 2048; + + /// + /// The number of bytes in the reception queue at which flow is re-enabled (default: 512) + /// + [UsedImplicitly] + public int RxLowWater { get; set; } = 512; + + /// + /// Requested size for receive queue (default: 0 = use operating system default) + /// + [UsedImplicitly] + public int RxQueue { get; set; } + + /// + /// Constant. Max time for Send in ms = (Multiplier * Characters) + Constant (default: 0) + /// + [UsedImplicitly] + public int SendTimeoutConstant { get; set; } + + /// + /// Multiplier. Max time for Send in ms = (Multiplier * Characters) + Constant + /// (default: 0 = No timeout) + /// + [UsedImplicitly] + public int SendTimeoutMultiplier { get; set; } + + /// + /// Number of stop bits (default: one) + /// + [UsedImplicitly] + public StopBits StopBits { get; set; } = StopBits.One; + + /// + /// If true, transmission is halted unless CTS is asserted by the remote station (default: false) + /// + [UsedImplicitly] + public bool TxFlowCts { get; set; } + + /// + /// If true, transmission is halted unless DSR is asserted by the remote station (default: false) + /// + [UsedImplicitly] + public bool TxFlowDsr { get; set; } + + /// + /// If true, transmission is halted when Xoff is received and restarted when Xon is received (default: false) + /// + [UsedImplicitly] + public bool TxFlowX { get; set; } + + /// + /// Requested size for transmit queue (default: 0 = use operating system default) + /// + [UsedImplicitly] + public int TxQueue { get; set; } + + /// + /// If false, transmission is suspended when this station has sent Xoff to the remote station (default: true) + /// Set false if the remote station treats any character as an Xon. + /// + [UsedImplicitly] + public bool TxWhenRxXoff { get; set; } = true; + + /// + /// Specidies the use to which the DTR output is put (default: none) + /// + [UsedImplicitly] + public HsOutput UseDtr { get; set; } = HsOutput.None; + + /// + /// Specifies the use to which the RTS output is put (default: none) + /// + [UsedImplicitly] + public HsOutput UseRts { get; set; } = HsOutput.None; + + /// + /// The character used to signal Xoff for X flow control (default: DC3) + /// + [UsedImplicitly] + public ASCII XoffChar { get; set; } = ASCII.DC3; + + /// + /// The character used to signal Xon for X flow control (default: DC1) + /// + [UsedImplicitly] + public ASCII XonChar { get; set; } = ASCII.DC1; + + /// + /// True if online. + /// + [UsedImplicitly] + public bool Online => _online && CheckOnline(); + + /// + /// True if the RTS pin is controllable via the RTS property + /// + [UsedImplicitly] + protected bool RtSavailable => _stateRts < 2; + + /// + /// Set the state of the RTS modem control output + /// + protected bool Rts + { + set + { + if (_stateRts > 1) return; + CheckOnline(); + if (value) + { + if (PInvoke.EscapeCommFunction(_hPort, ESCAPE_COMM_FUNCTION.SETRTS)) + _stateRts = 1; + else + ThrowException("Unexpected Failure"); + } + else + { + if (PInvoke.EscapeCommFunction(_hPort, ESCAPE_COMM_FUNCTION.CLRRTS)) + _stateRts = 1; + else + ThrowException("Unexpected Failure"); + } + } + get => _stateRts == 1; + } + + /// + /// True if the DTR pin is controllable via the DTR property + /// + protected bool DtrAvailable => _stateDtr < 2; + + /// + /// The state of the DTR modem control output + /// + protected bool Dtr + { + set + { + if (_stateDtr > 1) return; + CheckOnline(); + if (value) + { + if (PInvoke.EscapeCommFunction(_hPort, ESCAPE_COMM_FUNCTION.SETDTR)) + _stateDtr = 1; + else + ThrowException("Unexpected Failure"); + } + else + { + if (PInvoke.EscapeCommFunction(_hPort, ESCAPE_COMM_FUNCTION.CLRDTR)) + _stateDtr = 0; + else + ThrowException("Unexpected Failure"); + } + } + get => _stateDtr == 1; + } + + /// + /// Assert or remove a break condition from the transmission line + /// + protected bool Break + { + set + { + if (_stateBrk > 1) return; + CheckOnline(); + if (value) + { + if (PInvoke.EscapeCommFunction(_hPort, ESCAPE_COMM_FUNCTION.SETBREAK)) + _stateBrk = 0; + else + ThrowException("Unexpected Failure"); + } + else + { + if (PInvoke.EscapeCommFunction(_hPort, ESCAPE_COMM_FUNCTION.CLRBREAK)) + _stateBrk = 0; + else + ThrowException("Unexpected Failure"); + } + } + get => _stateBrk == 1; + } + + + /// + /// Port Name + /// + [UsedImplicitly] + public string PortName { get; set; } + + public Handshake Handshake + { + get => _handShake; + set + { + _handShake = value; + switch (_handShake) + { + case Handshake.None: + TxFlowCts = false; + TxFlowDsr = false; + TxFlowX = false; + RxFlowX = false; + UseRts = HsOutput.Online; + UseDtr = HsOutput.Online; + TxWhenRxXoff = true; + RxGateDsr = false; + break; + case Handshake.XonXoff: + TxFlowCts = false; + TxFlowDsr = false; + TxFlowX = true; + RxFlowX = true; + UseRts = HsOutput.Online; + UseDtr = HsOutput.Online; + TxWhenRxXoff = true; + RxGateDsr = false; + XonChar = ASCII.DC1; + XoffChar = ASCII.DC3; + break; + case Handshake.CtsRts: + TxFlowCts = true; + TxFlowDsr = false; + TxFlowX = false; + RxFlowX = false; + UseRts = HsOutput.Handshake; + UseDtr = HsOutput.Online; + TxWhenRxXoff = true; + RxGateDsr = false; + break; + case Handshake.DsrDtr: + TxFlowCts = false; + TxFlowDsr = true; + TxFlowX = false; + RxFlowX = false; + UseRts = HsOutput.Online; + UseDtr = HsOutput.Handshake; + TxWhenRxXoff = true; + RxGateDsr = false; + break; + } + } + } + + #endregion } \ No newline at end of file diff --git a/Nefarius.Peripherals.SerialPort/Util.cs b/Nefarius.Peripherals.SerialPort/Util.cs new file mode 100644 index 0000000..c0f22b0 --- /dev/null +++ b/Nefarius.Peripherals.SerialPort/Util.cs @@ -0,0 +1,23 @@ +using Windows.Win32.Devices.Communication; + +namespace Nefarius.Peripherals.SerialPort; + +internal static class DCBExtensions +{ + public static void Init(this DCB dcb, bool parity, bool outCts, bool outDsr, int dtr, bool inDsr, bool txc, + bool xOut, + bool xIn, int rts) + { + dcb.DCBlength = 28; + dcb._bitfield = 0x8001; + if (parity) dcb._bitfield |= 0x0002; + if (outCts) dcb._bitfield |= 0x0004; + if (outDsr) dcb._bitfield |= 0x0008; + dcb._bitfield |= (uint)((dtr & 0x0003) << 4); + if (inDsr) dcb._bitfield |= 0x0040; + if (txc) dcb._bitfield |= 0x0080; + if (xOut) dcb._bitfield |= 0x0100; + if (xIn) dcb._bitfield |= 0x0200; + dcb._bitfield |= (uint)((rts & 0x0003) << 12); + } +} \ No newline at end of file diff --git a/Nefarius.Peripherals.SerialPort/Win32PInvoke/COMMPROP.cs b/Nefarius.Peripherals.SerialPort/Win32PInvoke/COMMPROP.cs deleted file mode 100644 index bbd37be..0000000 --- a/Nefarius.Peripherals.SerialPort/Win32PInvoke/COMMPROP.cs +++ /dev/null @@ -1,28 +0,0 @@ -using System; -using System.Runtime.InteropServices; - -namespace Nefarius.Peripherals.SerialPort.Win32PInvoke -{ - [StructLayout(LayoutKind.Sequential)] - internal struct COMMPROP - { - internal UInt16 wPacketLength; - internal UInt16 wPacketVersion; - internal UInt32 dwServiceMask; - internal UInt32 dwReserved1; - internal UInt32 dwMaxTxQueue; - internal UInt32 dwMaxRxQueue; - internal UInt32 dwMaxBaud; - internal UInt32 dwProvSubType; - internal UInt32 dwProvCapabilities; - internal UInt32 dwSettableParams; - internal UInt32 dwSettableBaud; - internal UInt16 wSettableData; - internal UInt16 wSettableStopParity; - internal UInt32 dwCurrentTxQueue; - internal UInt32 dwCurrentRxQueue; - internal UInt32 dwProvSpec1; - internal UInt32 dwProvSpec2; - internal Byte wcProvChar; - } -} \ No newline at end of file diff --git a/Nefarius.Peripherals.SerialPort/Win32PInvoke/COMMTIMEOUTS.cs b/Nefarius.Peripherals.SerialPort/Win32PInvoke/COMMTIMEOUTS.cs deleted file mode 100644 index 6f74e2b..0000000 --- a/Nefarius.Peripherals.SerialPort/Win32PInvoke/COMMTIMEOUTS.cs +++ /dev/null @@ -1,15 +0,0 @@ -using System; -using System.Runtime.InteropServices; - -namespace Nefarius.Peripherals.SerialPort.Win32PInvoke -{ - [StructLayout(LayoutKind.Sequential)] - internal struct COMMTIMEOUTS - { - internal Int32 ReadIntervalTimeout; - internal Int32 ReadTotalTimeoutMultiplier; - internal Int32 ReadTotalTimeoutConstant; - internal Int32 WriteTotalTimeoutMultiplier; - internal Int32 WriteTotalTimeoutConstant; - } -} \ No newline at end of file diff --git a/Nefarius.Peripherals.SerialPort/Win32PInvoke/COMSTAT.cs b/Nefarius.Peripherals.SerialPort/Win32PInvoke/COMSTAT.cs index 523182c..693bae2 100644 --- a/Nefarius.Peripherals.SerialPort/Win32PInvoke/COMSTAT.cs +++ b/Nefarius.Peripherals.SerialPort/Win32PInvoke/COMSTAT.cs @@ -1,20 +1,19 @@ using System; using System.Runtime.InteropServices; -namespace Nefarius.Peripherals.SerialPort.Win32PInvoke +namespace Nefarius.Peripherals.SerialPort.Win32PInvoke; + +[StructLayout(LayoutKind.Sequential)] +internal struct COMSTAT { - [StructLayout(LayoutKind.Sequential)] - internal struct COMSTAT - { - internal const uint fCtsHold = 0x1; - internal const uint fDsrHold = 0x2; - internal const uint fRlsdHold = 0x4; - internal const uint fXoffHold = 0x8; - internal const uint fXoffSent = 0x10; - internal const uint fEof = 0x20; - internal const uint fTxim = 0x40; - internal UInt32 Flags; - internal UInt32 cbInQue; - internal UInt32 cbOutQue; - } + internal const uint fCtsHold = 0x1; + internal const uint fDsrHold = 0x2; + internal const uint fRlsdHold = 0x4; + internal const uint fXoffHold = 0x8; + internal const uint fXoffSent = 0x10; + internal const uint fEof = 0x20; + internal const uint fTxim = 0x40; + internal UInt32 Flags; + internal UInt32 cbInQue; + internal UInt32 cbOutQue; } \ No newline at end of file diff --git a/Nefarius.Peripherals.SerialPort/Win32PInvoke/DCB.cs b/Nefarius.Peripherals.SerialPort/Win32PInvoke/DCB.cs deleted file mode 100644 index ff3bee2..0000000 --- a/Nefarius.Peripherals.SerialPort/Win32PInvoke/DCB.cs +++ /dev/null @@ -1,41 +0,0 @@ -using System; -using System.Runtime.InteropServices; - -namespace Nefarius.Peripherals.SerialPort.Win32PInvoke -{ - [StructLayout(LayoutKind.Sequential)] - internal struct DCB - { - internal Int32 DCBlength; - internal Int32 BaudRate; - internal Int32 PackedValues; - internal Int16 wReserved; - internal Int16 XonLim; - internal Int16 XoffLim; - internal Byte ByteSize; - internal Byte Parity; - internal Byte StopBits; - internal Byte XonChar; - internal Byte XoffChar; - internal Byte ErrorChar; - internal Byte EofChar; - internal Byte EvtChar; - internal Int16 wReserved1; - - internal void Init(bool parity, bool outCts, bool outDsr, int dtr, bool inDsr, bool txc, bool xOut, - bool xIn, int rts) - { - DCBlength = 28; PackedValues = 0x8001; - if (parity) PackedValues |= 0x0002; - if (outCts) PackedValues |= 0x0004; - if (outDsr) PackedValues |= 0x0008; - PackedValues |= ((dtr & 0x0003) << 4); - if (inDsr) PackedValues |= 0x0040; - if (txc) PackedValues |= 0x0080; - if (xOut) PackedValues |= 0x0100; - if (xIn) PackedValues |= 0x0200; - PackedValues |= ((rts & 0x0003) << 12); - - } - } -} \ No newline at end of file diff --git a/Nefarius.Peripherals.SerialPort/Win32PInvoke/OVERLAPPED.cs b/Nefarius.Peripherals.SerialPort/Win32PInvoke/OVERLAPPED.cs deleted file mode 100644 index 8bd992a..0000000 --- a/Nefarius.Peripherals.SerialPort/Win32PInvoke/OVERLAPPED.cs +++ /dev/null @@ -1,15 +0,0 @@ -using System; -using System.Runtime.InteropServices; - -namespace Nefarius.Peripherals.SerialPort.Win32PInvoke -{ - [StructLayout(LayoutKind.Sequential)] - internal struct OVERLAPPED - { - internal UIntPtr Internal; - internal UIntPtr InternalHigh; - internal UInt32 Offset; - internal UInt32 OffsetHigh; - internal IntPtr hEvent; - } -} \ No newline at end of file diff --git a/Nefarius.Peripherals.SerialPort/Win32PInvoke/Win32Com.cs b/Nefarius.Peripherals.SerialPort/Win32PInvoke/Win32Com.cs deleted file mode 100644 index cd2cbb7..0000000 --- a/Nefarius.Peripherals.SerialPort/Win32PInvoke/Win32Com.cs +++ /dev/null @@ -1,155 +0,0 @@ -using System; -using System.Runtime.InteropServices; - -namespace Nefarius.Peripherals.SerialPort.Win32PInvoke -{ - internal class Win32Com - { - /// - /// Opening Testing and Closing the Port Handle. - /// - [DllImport("kernel32.dll", SetLastError = true)] - internal static extern IntPtr CreateFile(String lpFileName, UInt32 dwDesiredAccess, UInt32 dwShareMode, - IntPtr lpSecurityAttributes, UInt32 dwCreationDisposition, UInt32 dwFlagsAndAttributes, - IntPtr hTemplateFile); - - //Constants for errors: - internal const UInt32 ERROR_FILE_NOT_FOUND = 2; - internal const UInt32 ERROR_INVALID_NAME = 123; - internal const UInt32 ERROR_ACCESS_DENIED = 5; - internal const UInt32 ERROR_IO_PENDING = 997; - - //Constants for return value: - internal const Int32 INVALID_HANDLE_VALUE = -1; - - //Constants for dwFlagsAndAttributes: - internal const UInt32 FILE_FLAG_OVERLAPPED = 0x40000000; - - //Constants for dwCreationDisposition: - internal const UInt32 OPEN_EXISTING = 3; - - //Constants for dwDesiredAccess: - internal const UInt32 GENERIC_READ = 0x80000000; - internal const UInt32 GENERIC_WRITE = 0x40000000; - - [DllImport("kernel32.dll")] - internal static extern Boolean CloseHandle(IntPtr hObject); - - [DllImport("kernel32.dll")] - internal static extern Boolean GetHandleInformation(IntPtr hObject, out UInt32 lpdwFlags); - - - /// - /// Manipulating the communications settings. - /// - - [DllImport("kernel32.dll")] - internal static extern Boolean GetCommState(IntPtr hFile, ref DCB lpDCB); - - [DllImport("kernel32.dll")] - internal static extern Boolean GetCommTimeouts(IntPtr hFile, out COMMTIMEOUTS lpCommTimeouts); - - [DllImport("kernel32.dll")] - internal static extern Boolean BuildCommDCBAndTimeouts(String lpDef, ref DCB lpDCB, ref COMMTIMEOUTS lpCommTimeouts); - - [DllImport("kernel32.dll")] - internal static extern Boolean SetCommState(IntPtr hFile, [In] ref DCB lpDCB); - - [DllImport("kernel32.dll")] - internal static extern Boolean SetCommTimeouts(IntPtr hFile, [In] ref COMMTIMEOUTS lpCommTimeouts); - - [DllImport("kernel32.dll")] - internal static extern Boolean SetupComm(IntPtr hFile, UInt32 dwInQueue, UInt32 dwOutQueue); - - /// - /// Reading and writing. - /// - [DllImport("kernel32.dll", SetLastError = true)] - internal static extern Boolean WriteFile(IntPtr fFile, Byte[] lpBuffer, UInt32 nNumberOfBytesToWrite, - out UInt32 lpNumberOfBytesWritten, IntPtr lpOverlapped); - - [DllImport("kernel32.dll")] - internal static extern Boolean SetCommMask(IntPtr hFile, UInt32 dwEvtMask); - - // Constants for dwEvtMask: - internal const UInt32 EV_RXCHAR = 0x0001; - internal const UInt32 EV_RXFLAG = 0x0002; - internal const UInt32 EV_TXEMPTY = 0x0004; - internal const UInt32 EV_CTS = 0x0008; - internal const UInt32 EV_DSR = 0x0010; - internal const UInt32 EV_RLSD = 0x0020; - internal const UInt32 EV_BREAK = 0x0040; - internal const UInt32 EV_ERR = 0x0080; - internal const UInt32 EV_RING = 0x0100; - internal const UInt32 EV_PERR = 0x0200; - internal const UInt32 EV_RX80FULL = 0x0400; - internal const UInt32 EV_EVENT1 = 0x0800; - internal const UInt32 EV_EVENT2 = 0x1000; - - [DllImport("kernel32.dll", SetLastError = true)] - internal static extern Boolean WaitCommEvent(IntPtr hFile, IntPtr lpEvtMask, IntPtr lpOverlapped); - - [DllImport("kernel32.dll")] - internal static extern Boolean CancelIo(IntPtr hFile); - - [DllImport("kernel32.dll", SetLastError = true)] - internal static extern Boolean ReadFile(IntPtr hFile, [Out] Byte[] lpBuffer, UInt32 nNumberOfBytesToRead, - out UInt32 nNumberOfBytesRead, IntPtr lpOverlapped); - - [DllImport("kernel32.dll")] - internal static extern Boolean TransmitCommChar(IntPtr hFile, Byte cChar); - - /// - /// Control port functions. - /// - [DllImport("kernel32.dll")] - internal static extern Boolean EscapeCommFunction(IntPtr hFile, UInt32 dwFunc); - - // Constants for dwFunc: - internal const UInt32 SETXOFF = 1; - internal const UInt32 SETXON = 2; - internal const UInt32 SETRTS = 3; - internal const UInt32 CLRRTS = 4; - internal const UInt32 SETDTR = 5; - internal const UInt32 CLRDTR = 6; - internal const UInt32 RESETDEV = 7; - internal const UInt32 SETBREAK = 8; - internal const UInt32 CLRBREAK = 9; - - [DllImport("kernel32.dll")] - internal static extern Boolean GetCommModemStatus(IntPtr hFile, out UInt32 lpModemStat); - - // Constants for lpModemStat: - internal const UInt32 MS_CTS_ON = 0x0010; - internal const UInt32 MS_DSR_ON = 0x0020; - internal const UInt32 MS_RING_ON = 0x0040; - internal const UInt32 MS_RLSD_ON = 0x0080; - - /// - /// Status Functions. - /// - [DllImport("kernel32.dll", SetLastError = true)] - internal static extern Boolean GetOverlappedResult(IntPtr hFile, IntPtr lpOverlapped, - out UInt32 nNumberOfBytesTransferred, Boolean bWait); - - [DllImport("kernel32.dll")] - internal static extern Boolean ClearCommError(IntPtr hFile, out UInt32 lpErrors, IntPtr lpStat); - [DllImport("kernel32.dll")] - internal static extern Boolean ClearCommError(IntPtr hFile, out UInt32 lpErrors, out COMSTAT cs); - - //Constants for lpErrors: - internal const UInt32 CE_RXOVER = 0x0001; - internal const UInt32 CE_OVERRUN = 0x0002; - internal const UInt32 CE_RXPARITY = 0x0004; - internal const UInt32 CE_FRAME = 0x0008; - internal const UInt32 CE_BREAK = 0x0010; - internal const UInt32 CE_TXFULL = 0x0100; - internal const UInt32 CE_PTO = 0x0200; - internal const UInt32 CE_IOE = 0x0400; - internal const UInt32 CE_DNS = 0x0800; - internal const UInt32 CE_OOP = 0x1000; - internal const UInt32 CE_MODE = 0x8000; - [DllImport("kernel32.dll")] - internal static extern Boolean GetCommProperties(IntPtr hFile, out COMMPROP cp); - } -} \ No newline at end of file